? semiconductor components industries, llc, 2012 february, 2012 ? rev. 4 1 publication order number: smf05c/d smf05ct1g, SMF12CT1G, smf15ct1g, smf24ct1g, szSMF12CT1G 5-line transient voltage suppressor array this 5 ? line voltage transient suppressor array is designed for application requiring transient voltage protection capability. it is intended for use in over ? transient voltage and esd sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. this device features a monolithic common anode design which protects five independent lines in a single sc ? 88 package. features ? protects up to 5 ? line in a single sc ? 88 package ? peak power dissipation ? 100 w (8 x 20 s waveform) ? esd rating of class 3b (exceeding 8 kv) per human body model and class c (exceeding 400 v) per machine model. ? compliance with iec 61000 ? 4 ? 2 (esd) 15 kv (air), 8 kv (contact) ? flammability rating of ul 94 v ? 0 ? sz prefix for automotive and other applications requiring unique site and control change requirements; aec ? q101 qualified and ppap capable ? pb ? free packages are available* applications ? hand ? held portable applications ? networking and telecom ? automotive electronics ? serial and parallel ports ? notebooks, desktops, servers maximum ratings (t j = 25 ? c unless otherwise specified) symbol rating value unit p pk 1 peak power dissipation 8 x 20 s double exponential waveform (note 1) 100 w t j operating junction temperature range ? 40 to 125 ? c t stg storage temperature range ? 55 to 150 ? c t l lead solder temperature (10 s) 260 ? c esd human body model (hbm) machine model (mm) iec 61000 ? 4 ? 2 air (esd) iec 61000 ? 4 ? 2 contact (esd) 16000 400 15000 15000 v stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. nonrepetitive current pulse per figure 3. *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. sc ? 88 five transient voltage suppressor 100 w peak power sc ? 88 case 419b style 24 1 2 3 6 5 4 marking diagram pin assignment pin 1. cathode 2. anode 3. cathode 4. cathode 5. cathode 6. cathode http://onsemi.com xx = specific device code 6j = smf05c 6k = szsmf12c/smf12c 6l = smf15c 6m = smf24c m = date code =pb ? free package xx m 1 6 see detailed ordering and shipping information in the package dimensions section on p age 3 of this data sheet. ordering information
smf05ct1g, SMF12CT1G, smf15ct1g, smf24ct1g, szSMF12CT1G http://onsemi.com 2 smf05ct1g electrical characteristics (t j = 25 ? c unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm (note 2) 5.0 v breakdown voltage v br i t = 1 ma, (note 3) 6.2 7.2 v reverse leakage current i r v rwm = 5 v 0.07 5.0 a clamping voltage v c i pp = 5 a (8 x 20 s waveform) 9.8 v clamping voltage v c i pp = 8 a (8 x 20 s waveform) 12.5 v maximum peak pulse current i pp 8 x 20 s waveform 8.0 a capacitance c j v r = 0 v, f = 1 mhz (line to gnd) 80 130 pf SMF12CT1G electrical characteristics (t j = 25 ? c unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm (note 2) 12 v breakdown voltage v br i t = 1 ma, (note 3) 13.3 15 v reverse leakage current i r v rwm = 12 v 0.01 0.1 a clamping voltage v c i pp = 3 a (8 x 20 s waveform) 21 v clamping voltage v c i pp = 6 a (8 x 20 s waveform) 23 v maximum peak pulse current i pp 8 x 20 s waveform 6.0 a capacitance c j v r = 0 v, f = 1 mhz (line to gnd) 40 60 pf smf15ct1g electrical characteristics (t j = 25 ? c, unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm (note 2) 15 v breakdown voltage v br i t = 1 ma, (note 3) 17 19 v reverse leakage current i r v rwm = 15 v 0.01 1.0 a clamping voltage v c i pp = 1 a (8 x 20 s waveform) 23 v clamping voltage v c i pp = 5 a (8 x 20 s waveform) 29 v maximum peak pulse current i pp 8 x 20 s waveform 5.0 a capacitance c j v r = 0 v, f = 1 mhz (line to gnd) 33 45 pf smf24ct1g electrical characteristics (t j = 25 ? c, unless otherwise specified) parameter symbol conditions min typ max unit reverse working voltage v rwm (note 2) 24 v breakdown voltage v br i t = 1 ma, (note 3) 26.7 32 v reverse leakage current i r v rwm = 24 v 0.01 1.0 a clamping voltage v c i pp = 1 a (8 x 20 s waveform) 40 v clamping voltage v c i pp = 2.5 a (8 x 20 s waveform) 44 v maximum peak pulse current i pp 8 x 20 s waveform 2.5 a capacitance c j v r = 0 v, f = 1 mhz (line to gnd) 21 25 pf 2. tvs devices are normally selected according to the working peak reverse voltage (v rwm ), which should be equal or greater than the dc or continuous peak operating voltage level. 3. v br is measured at pulse test current i t . 4. include sz-prefix devices where applicable.
smf05ct1g, SMF12CT1G, smf15ct1g, smf24ct1g, szSMF12CT1G http://onsemi.com 3 typical performance curves (t j = 25 ? c unless otherwise specified) figure 1. pulse derating curve 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 175 200 t a , ambient temperature ( ? c) figure 2. 8 ? 20 s pulse waveform 100 90 80 70 60 50 40 30 20 10 0 0204060 t, time ( s) % of peak pulse current t p t r pulse width (t p ) is defined as that point where the peak current decay = 8 s peak value i rsm @ 8 s half value i rsm /2 @ 20 s 80 figure 3. clamping voltage vs peak pulse current 100 10 1 0510 i pp , peak pulse current (a) v clamp , clamping voltage (v) 15 figure 4. junction capacitance vs reverse voltage 100 10 1 05 v br , reverse voltage (v) junction capacitance (pf) 10 15 20 25 smf05ct1g SMF12CT1G smf15ct1g smf24ct1g smf05ct1g SMF12CT1G smf15ct1g smf24ct1g peak power dissipation (%) ordering information device package shipping ? smf05ct1g sc ? 88 (pb ? free) 3,000 / tape & reel smf05ct2g* sc ? 88 (pb ? free) 3,000 / tape & reel SMF12CT1G sc ? 88 (pb ? free) 3,000 / tape & reel smf15ct1g sc ? 88 (pb ? free) 3,000 / tape & reel smf24ct1g sc ? 88 (pb ? free) 3,000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. *the ?t2? suffix refers to an alternate tape & reel orientation.
smf05ct1g, SMF12CT1G, smf15ct1g, smf24ct1g, szSMF12CT1G http://onsemi.com 4 package dimensions notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 419b ? 01 obsolete, new standard 419b ? 02. e 0.2 (0.008) mm 123 d e a1 a a3 c l 654 ? e ? b 6 pl sc ? 88/sc70 ? 6/sot ? 363 case 419b ? 02 issue w dim min nom max millimeters a 0.80 0.95 1.10 a1 0.00 0.05 0.10 a3 b 0.10 0.21 0.30 c 0.10 0.14 0.25 d 1.80 2.00 2.20 0.031 0.037 0.043 0.000 0.002 0.004 0.004 0.008 0.012 0.004 0.005 0.010 0.070 0.078 0.086 min nom max inches 0.20 ref 0.008 ref h e h e e 1.15 1.25 1.35 e 0.65 bsc l 0.10 0.20 0.30 2.00 2.10 2.20 0.045 0.049 0.053 0.026 bsc 0.004 0.008 0.012 0.078 0.082 0.086 style 24: pin 1. cathode 2. anode 3. cathode 4. cathode 5. cathode 6. cathode mm inches scale 20:1 0.65 0.025 0.65 0.025 0.50 0.0197 0.40 0.0157 1.9 0.0748 *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* sc ? 88/sc70 ? 6/sot ? 363 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 smf05c/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
